Privately Owned
MY UMBRA
An experienced Australian yacht owner purchased a Damen YS 5009 to refit and meet his exacting requirements for long range cruising and exploration.
Of particular importance during the refit, was the requirement to reduce the roll in order to provide a comfortable, stable and safe platform for the vessel whilst underway, at anchor, undertaking helicopter operations from its dual heli pads, launching and recovering large tenders and hosting guests.
The vessel underwent a hull extension to enlarge the deck area to accommodate larger tenders and a beach club module. This provided the perfect opportunity to configure the aft compartment for the VG520SD.
An uncompromising adhesion to VEEM Marine’s installation guidelines and selecting suitable ancillary equipment for powering, cooling and controlling the Gyrostabilizer has resulted in a Gyrostabilizer that is easily accessible for inspection and maintenance, benefiting its reliability and longevity.
The project was successfully commissioned during sea trials off the coast of Western Australia where the VG520SD achieved an impressive >70 roll reduction.
Overview
Client
Privately owned
Vessel
MY UMBRA
Location
Perth, Western Australia
Year
2021
Gyro Model
VG520SD
Gyro Angular Momentum
520 kN.m.s
Gyro Rated Speed
1940rpm
Gyro Dimensions
3.4m l x 3.1m w x 2.5m h
Gyro Weight
20,100 kg
Vessel LOA
60m (extended during refit from 54m)
Hull
Steel
Find the right VEEM Marine Gyrostabilizer for your Vessel.
VG52 Mark II
Suitable for vessels 65' - 120'
Angular momentum: 52 [kN.m.s]
Rated Stabilizing Torque: 120 [kN.m]
1.65m x 1.59m x 1.20m
VG70 Mark II
Suitable for vessels 65' - 120'
Angular momentum: 70 [kN.m.s]
Rated Stabilizing Torque: 145 [kN.m]
1.65m x 1.59m x 1.20m
VG100 Mark II
Suitable for vessels 110' - 165'
Angular momentum: 100 [kN.m.s]
Rated Stabilizing Torque: 260 [kN.m]
2.10m x 2.04m x 1.57m
VG140 Mark II
Suitable for vessels 110' - 165'
Angular momentum: 140 [kN.m.s]
Rated Stabilizing Torque: 260 [kN.m]
2.10m x 2.04m x 1.57m
VG520
Suitable for vessels 150' - 300'+
Angular momentum: 520 [kN.m.s]
Rated Stabilizing Torque: 1000 [kN.m]
3.40m x 3.09m x 2.47m
VG750
Suitable for vessels 150' - 300'+
Angular momentum: 750 [kN.m.s]
Rated Stabilizing Torque: 1000 [kN.m]
3.40m x 3.09m x 2.47m
Service and Support
Learn more about VEEM Marine servicing, spare parts, telemetry and remote servicing.
